Shenzhen Best Automation Equipment Co., Ltd.
BT Focusing on cylindrical lithium battery Pack Intelligent Automated Production Line Equipment
Add to Cart
100V 20A Charging 40A Discharging Battery Pack Aging Machine For Lithium Battery Pack
Introduction:
For the charging and discharge of the battery pack, with the function of constant current and constant pressure, through the battery charging and discharge cycle, you can detect whether the battery charging protection and discharge protection are normal
Testing items include: battery charging protection voltage, discharging protection voltage, capacity, etc.
Product characteristics:
♦ The 32-bit ARM chip selected for aging system has high reaction speed block and high measuring voltage and current accuracy
♦ Pass the data via the PS232 or via the network
♦ Based on the Windows operation interface, the MYSQ database is used to store the test data
♦ The voltage can be set at a maximum of 10-100V, charging current 2-20A, discharge current 2-40A
♦ With PC software, USB hub, and router
♦ The computer is not configured locally, so the customer needs to buy it itself
♦ With constant current and constant pressure charging function
♦ The equipment has a constant current discharge function
| Input Power | AC 380V 2kw 50/60Hz | |
| Voltage | Measuring range | 10~100V |
| Precision | ±(0.2% of reading + 0.2% of range) | |
| Electric Current | Charging range | 2~20A |
| Charging accuracy | ±(0.2% of reading + 0.2% of range) | |
| Discharge range | 2~40A | |
| Precision | ±(0.2% of reading + 0.2% of range) | |
| Charging | Constant voltage cut-off current | (minimum)10mA |
| Capacity | Precision | ±1‰ |
| Power | Discharge power | 4000W |
| Time | Inspection time | <2S(Receive real-time & LT; 2s) |
| Timing range | 0 ~ 999 hours / Step | |
| Data recording interval | ≥5S | |
| Median version | 1.1 series | |
| Charging | Charging mode | Constant current and constant voltage charging |
| Cut-off condition | Voltage, current, relative time, overcharge protection | |
| Discharge | Discharge mode | Constant current discharge |
| Cut-off condition | Voltage, relative time, over-discharge protection | |
| Circulates | Cyclic range | 1~999 |
| Single cycle number of steps | 100 | |
| Voltage and current detection sampling | Four wire connection | |
| Noise | <50dB | |
| Database | Using My SQL database to manage test data | |
| Communication Mode of upper computer | Based on TCP / IP Protocol, serial port | |
| Data output mode | EXCEL,TXT,Chart | |
| Communication interface | Mesh opening | |
| Number of channels per cabinet | Single Channel | |
| Case size | W*D*H:800MM*520MM*1370MM | |
| Cabinet size | W*D*H:700MM*400MM*420MM | |
FAQ
A:How can i install and operate the machine by myself?
B:Our system R&D based on intearated development viewwhen you get the machine, just need to connect it with the electrical power, then machine can be working. because the English software were installed in thismachine.what you need to do is only learning the software usage,and the complete English user manual will be coning to you with the machine.
A:How to order?
B:Please send us your purchase order by email or call us salesor we can make the proforma invoice under your request. We need to know the following information for your order before sending your PI.
A:What's the warranty for the items?
B:We are very confident in our productsand we pack them very well, so usually you will receive your order in good condition. any quality issue,we will deal with it immediately.Warranty for equipment is a year (24months) if the equipment parts are damaged due to non human factors within one year, we will provide replacement parts free of charge.
A:What scope does the product apply to?
B:Company 13 years committed to column Battery Pack Automation Production Equipment, and column Battery Pack Automation Production Line. Products are mainly used in digital batteries, energy storage batteries, tool batteries,power batteries, automotive batteries, etc.
